Water Softener Filter
Softener Filter Used To Remove Hardness/Eliminate The Lime Content Of Calcium And Magnesium By Way Of Exchange Of Ions Ca2 +/Mg2 +. This Cation Ion Exchange Continued In The Tube To The Softener Resins The Cation Saturation. At The Time Of Resin Cation Saturation Then The Resin Can Be Used Again After The Resin Be Regenerated Using Salt Nacl.
Water Hardness Is Kandunganmineral-Certain Minerals In The Water, Generally Calcium Ions (Ca) And Magnesium (Mg) In The Form Of Salt Carbonates. Hard Water Or Hard Water Is Water That Has High Mineral Levels, While The Soft Water Is Water With A Low Mineral Content. In Addition To The Calcium Ions And Magnesium, The Hardness Can Also Cause The Other Metal Ions Or Salts Bicarbonate And Sulfate. The Simplest Method For Determining The Hardness Of Water Is With Soap. In The Soft Water, Soap Will Generate A Lot Of Foam. In Hard Water, Soap Foam Will Not Produce Or Produces Very Little Foam. A More Complex Way Is Through Titration. Total Water Hardness Is Expressed In Units Of Ppm Weight Per Volume (W/V) Of Caco3.
Hard Water Is Not So Dangerous To Drink, But Can Cause Some Problems. Hard Water Can Cause Mineral Deposition, Which Clog Up The Pipes And Faucets. Hard Water Also Causes A Waste Of Soap In Households, And Water Mixed Hard Soap Can Form Clumps Of Scum That Is Difficult To Be Removed. In Industry, The Hardness Of Water Used Watched Closely To Prevent Losses. To Eliminate The Hardness Is Usually Used A Variety Of Chemical Substances, Or By Using Ion Exchange Resin
The Easiest Way To Find Out The Water That The Water You Use Is Always Aware Of Or Are Not Using Soap. When The Water You Use Is Hard Water, The Soap Will Be Difficult, Even If Berbiuh, Berbuihnya A Little Bubbly. Then To Find Out The Type Of Water Hardness Is To Warm Up. If It Turns Out